Filter
Top Products
206
Menu: Menu Description Tables
The ____ in the Adjustable Range column indicates the preset mode.
OPTION MENU
OPTION
Items/
Data Saved
Adjustable
Range
Remarks
ENG SECURITY ON
OFF
Select whether or not to prohibit opening
the menu screen.
ON: Menu screen cannot be opened.
Please consult your distributor to
release the setting.
OFF: Menu screen can be opened.
–––––
FRAME RATE
UB
FRM RATE
MENU
For setting the user bits to record when
the video system is set to 24P or 24PA.
For details, refer to [Recording time code
and user bits] (page 64).
FRM RATE:
For recording the shooting
information (frame rate etc.) of
the camera.
MENU: This follows the settings in the
UB MODE item and the VITC UB
MODE item of <TC/UB> screen.
However, the camera shooting
information is always recorded
when recording in native mode.
–C–––
AUDIO OUT
DELAY
DELAYED
THROUGH
Select whether or not to delay audio,
headphone and speaker outputs.
DELAYED:
Delay audio output in
synchronization with video
output.
THROUGH:
Output audio input without delay.
This setting prevents echo effect
between the sound source and
audio output when the sound
source is near the unit.
–C–––
FAN MODE OFF
AUTO
For setting the operation mode of the fan
OFF: The fan always stops.
AUTO: The fan will run automatically
when the temperature in the unit
increases.
Note
Once the power is turned off, this will
always be set to “AUTO” whenever the
power is turned on. If the unit is operated
as the fan stops, the temperature in the
unit will increase, and data may not
record or play back properly. Use the unit
after setting this item to “AUTO” for
normal operation.
–––––
RATE SET AT
REC
ON
OFF
For setting if the frame rate can be
changed or not during VFR recording.
ON: Frame rate can be changed.
OFF: Frame rate cannot be changed.
Note
Audio while recording VFR will not be
recorded onto the P2 card regardless of
the frame rate setting when this is set to
“ON”.
–CUF–
AREA SETTING
Items/
Data Saved
Adjustable
Range
Remarks
AREA SELECT NTSC
NTSC (J)
PAL
NTSC: Selects an NTSC area outside
Japan.
NTSC (J):
Selects Japan.
PAL: Selects a PAL area.
–––––
AREA SET –
For changing the area setting selected
using AREA SELECT. For more details
about settings used in different areas,
refer to [Color TV Standard Settings
(Settings for frame frequency)]
(page 14).
–––––
AJ-HPX3700G-VQT1V68_eng.book 206 ページ ２００８年１０月１５日 水曜日 午後６時３８分