Filter
Top Products
121
Preparation: Mounting the Camera on a Tripod
Preparation
1 Connect the audio device to the AUDIO IN jack with the
XLR cable.
2 Set the AUDIO IN switch to [REAR] for the channel to
which the XLR cable is connected.
3 Set the LINE/MIC/+48V selector switch on the rear
panel to [LINE].
a. LINE/MIC/+48V selector switch
b. AUDIO IN switch
c. AUDIO IN jack
When mounting the camera on a tripod, use the tripod adapter supplied with the camera.
1 Mount the tripod adapter on the tripod.
a. Tripod adapter
b. Pan head
Note
Select an appropriate hole in the adapter, taking into
account the center of gravity of the camera and tripod
adapter combined.
Also, make sure that the diameter of the selected hole
matches the diameter of the pan head screw.
2 Mount the camera on the tripod adapter.
Slide the camera forward along the grooves until you
hear a “click”.
c. Tripod adapter
d. Red lever
e. Black lever
While holding the red lever down, move the black lever in the
direction of the arrow, and slide the camera backward to
remove it.
Note
If the tripod adapter pin does not return to its original position
after the camera has been removed, hold the red lever down
and move the black lever in the direction of the arrow again,
in order to return the pin to its original position.
Please note that the camera cannot be mounted if the pin
remains in the center.
When Using Audio Devices
a
b
c
Mounting the Camera on a Tripod
a
b
Removing the Camera from the Tripod Adapter
c
d
e
AJ-HPX3700G-VQT1V68_eng.book 121 ページ ２００８年１０月１５日 水曜日 午後６時３８分