Filter
Top Products
181
Menu: Menu Description Tables
Menu
Note
The items indicated by are the setting items for PAINT
MENU SW() R/W in the <SD CARD R/W SELECT>
screen. The items without are the setting items for PAINT
MENU LEVEL R/W.
Please refer to [SD CARD R/W SELECT] (page 201) for
more information.
HIGH SETTING
Items/
Data Saved
Adjustable
Range
Remarks
MASTER GAIN –3dB
:
6dB
:
30dB
Select the master gain from –3, 0, 3, 6,
9, 12, 15, 18, 21, 24, 27, or 30 dB.
SCUF–
H.DTL LEVEL 00
:
06
:
63
For performing the horizontal detail
correction level setting.
SCUF–
V.DTL LEVEL 00
:
10
:
31
For performing the vertical detail
correction level setting.
SCUF–
DTL CORING 00
:
12
:
60
For performing the noise elimination
level setting for detail.
SCUF–
H.DTL FREQ. 00
:
18
:
31
For performing the horizontal detail
frequency selection.
SCUF–
LEVEL DEPEND. 0
:
3
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details
of dark sections are compressed.
If the numerical value is larger, details of
bright sections are also compressed.
SCUF–
MASTER
GAMMA
0.30
:
0.45
:
0.75
For setting the master gamma. (0.01
step)
SCUF–
BLACK GAMMA –8
:
OFF
:
+8
For setting the gamma curve for the dark
portion.
–8 to –1:
The dark portion is compressed.
OFF: Standard state
+1 to +8:
The dark portion is extended.
SCUF–
B.GAMMA
RANGE
1
2
3
For setting the upper limit of
compression/expansion.
1: Approximately 20%
2: Approximately 30%
3: Approximately 40%
SCUFR
MATRIX
TABLE
OFF
A
B
For selecting the color correction table
for the linear matrix.
SCUF–
COLOR
CORRECT
ON
OFF
For switching on/off of the 12-axis
independent color correction.
SCUF–
ADDITIONAL DTL
Items/
Data Saved
Adjustable
Range
Remarks
KNEE APE LVL OFF
1
:
5
For changing the detail level of the high
brightness portion.
SCUFR
DTL GAIN(+) –31
:
+00
:
+31
Adjust the detail level toward +
(upwards).
SCUFR
DTL GAIN(–) –31
:
+00
:
+31
Adjust the detail level toward the –
(downwards).
SCUFR
DTL CLIP 00
:
63
For setting the level for clipping the detail
signals.
SCUFR
DTL SOURCE (R+G)/2
(G+B)/2
2G+R+B /4
(3G+R)/4
R
G
For setting the proportion of the RGB
signal components that provide the
detail.
SCUFR
MASTER DTL –31
:
+00
:
+31
For revising the master detail level.
SCUFR
AJ-HPX3700G-VQT1V68_eng.book 181 ページ ２００８年１０月１５日 水曜日 午後６時３８分