Filter
Top Products
17
GB
Preparations
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
6Connecting the AC
power source
1
Insert one plug of the supplied AC
power cord to the supplied AC
adapter.
2
Insert the other plug of the AC
power cord to the wall outlet.
3
Insert the plug of the AC adapter
to the DC IN jack of the printer.
The ON/STANDBY indicator lights
in red.
To DC IN
AC adapter
(supplied)
To the wall outlet
AC power cord (supplied)
Notes
• Connect the AC adapter to an easily accessible
wall outlet close by. If some trouble occurs
while using the adaptor, immediately shut off
the power by disconnecting the plug from the
wall outlet.
• When you have finished using the AC adapter,
disconnect it from the DC IN jack of the printer
and the wall outlet.
• The set is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet , even if the unit itself has been
turned off.
• The print paper emerges from the paper outlet
a few times during printing. Do not block the
paper outlet with the AC adapter or AC power
cord.
• Be sure to use the AC adapter supplied with the
printer. Do not use other AC adapter, as this
may cause malfunction.
• In case the cord of the AC adapter is
disconnected or damaged, never use it any
longer, as this may cause danger.
• Do not short the DC plug of the AC adapter
with a metallic object, as this may cause
malfunction.
• Do not use the AC adapter in a narrow space,
such as the one close to the wall.
4
Press ON/STANDBY.
The ON/STANDBY indicator lights
in green.
Using your printer abroad
You can use your printer in any country or
region with the AC adapter (supplied)
within 100 V to 240 V AC, 50/60 Hz. Use
a commercially available AC plug adaptor
[a], if necessary, depending on the design
of the wall outlet (wall socket) [b]/
AC-S24V1
Note
Do not use an electronic transformer (travel
converter), as this may cause a malfunction.
001GBFP5004PRE-UC/CED.p65 3/11/05, 4:22 PM17