Filter
Top Products
93
GB
Additional information
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Types of “Memory Stick” that
the printer can use
With the printer, you can do the following
operations for each type of “Memory
Stick”:
Read Write/Delete/
Format
“Memory Stick”/
“Memory Stick” (with OK OK
memory select
function)/“Memory
Stick Duo”
“Memory Stick”
(MagicGate/High-Speed
Transfer Compatible)/ OK
*1*2
OK
*1*2
/“Memory Stick Duo”
(MagicGate/High-Speed
Transfer Compatible)
“MagicGate Memory
Stick”/“MagicGate OK
*1
OK
*1
Memory Stick Duo”
*2
“Memory Stick PRO” OK
*1*2
OK
*1*2
“Memory Stick PRO Duo”
2
“Memory Stick-ROM” OK NO
*1 The printer cannot read/write the data subject to
“MagicGate” copyright protection.
*2 It does not support parallel interface high-speed
data transfer.
We cannot guarantee the operations of all the
“Memory Stick” media.
On data read/write speed
The data read/write speed differs
depending on the combination of the
“Memory Stick” and the device you use.
What is “MagicGate”?
“MagicGate” is the copyright protection
technology that works when both the
“Memory Stick” and the device employ the
technology. The “MagicGate”-compliant
device and the “MagicGate Memory Stick”
attest that each other supports the
“MagicGate” technology and encode the
data they exchange.
The printer does not support the
“MagicGate” standards and cannot read or
write the data subject to the “MagicGate”
copyright protection.
Notes on use
• When you slide the write protect switch
to the write protect position, you cannot
record, edit, or delete the data.
• When you slide the write protect switch
of the “Memory Stick Duo”, use a thin-
pointed device.
• Avoid removing the “Memory Stick”
from the printer while the printer is
reading or writing data.
• Data may be damaged in such
occasions:
– “Memory Stick” is removed or the
ON/STANDBY button is turned off
while the printer is reading or writing
the “Memory Stick” data.
– “Memory Stick” is used in a location
subject to electrostatic or electronic
noises.
• We recommend that you save backup of
the important data.
• Attach the label designed for the
“Memory Stick” only to the place for the
label.
• When attaching the label, attach it to the
place specified for the label. Make sure
that the label does not overlap.
Continued
LOCK LOCK
Write
protect
position
Write
enable
position
Connector
Place the label here.
001GBFP5013ADD-UC/CED.p65 3/11/05, 4:23 PM93