Filter
Top Products
85
GB
Troubleshooting
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
Symptom
Colors are not
reproduced
correctly.
Preview image
does not reflect the
print settings in
the “Graphics” tab
of the “Sony DPP-
FP50 Properties”
dialog box.
Print quantity
specified in the
“Paper/Output”
tab of the “Sony
DPP-FP50
Properties” dialog
box does not take
effect.
Check
• Is “Exif Print”
checked in the
“Graphics” tab of the
“Sony DPP-FP50
Properties” dialog
box?
•
Is “ICM” selected in
the “Graphics” tab of
the “Sony DPP-FP50
Properties” dialog
box?
• Are you using
PictureGear Studio?
Cause/Solutions
c The Exif Print setting in the “Color
reproduction/Picture quality” section
supports the PictureGear Studio only. To
print from other application, uncheck
“Exif Print”.
cThe ICM setting may be valid only when
you are using an ICM-compliant
application. Check to see if the application
software you are using supports ICM.
cThe print settings adjusts the printer itself
and cannot influence the preview image.
cSet the print quantity in the “Print” dialog
box of the PictureGear Studio. The print
quantity setting in the “Paper/Output”
tab of the printer driver does not take
effect.
cDepending on the application you use,
the print quantity setting of the
application you use may have priority
over the setting specified in the printer
driver dialog box.
001GBFP5012TRB-UC/CED.p65 3/11/05, 4:23 PM85