Filter
Top Products
63
GB
Printing from a PC (PC mode)
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)
The “PictureGear Studio Media
Watcher” dialog box is displayed.
6 To register the Media Watcher,
check “Register the PictureGear
Studio Media Watcher in the
startup folder.” and then click
“OK”.
When the installation is completed,
the installation complete dialog box is
displayed.
What is “PictureGear Studio Media
Watcher”?
The PictureGear Studio Media
Watcher detects insertion of a device
or medium storing photos when the
PictureGear Studio is installed in an
operating system other than the
Windows XP.
To change the settings done during
installation, follow the procedures
below:
1 After you install the PictureGear
Studio software, click “Start”,
“Programs”, “PictureGear Studio”,
“Tools”, and then “Media
Watcher”.
The PictureGear Studio Media
Watcher is started.
2 Click the PictureGear Studio Media
Watcher icon on the taskbar with
the right mouse button, and click
“Settings” from the menu
displayed.
3 Add or clear the check mark for
“Starts the Media Watcher when
you log on Widows”.
To do registration, check the option.
To cancel registration, clear the
check box.
7 To display the Readme file, check
“View Readme File” and then
click “Finish”.
• When you check “View Readme
File”, the Readme file is displayed.
When you close the Readme file,
the PictureGear Studio Setup dialog
box is also closed.
• When you do not check “View
Readme File”, the PictureGear
Studio Setup dialog box is closed.
8 Remove the CD-ROM from your
computer and keep it for future
use.
Notes
• If the installation fails, do the installation
procedures from step 2.
• The supplied CD-ROM will be required when
you uninstall or re-install the PictureGear
Studio. Keep it in good order for possible
future use.
• The PictureGear Studio supplied with the
DPP-FP50 has the following limitations:
– In PhotoCollection, you cannot select paper
other than “Sony”.
– In PrintStudio, you cannot create or print
“Label”.
– In PrintStudio, you cannot create or print a
“Sticker, name card, or card”.
– In PrintStudio, you cannot print part of
“Postcard” designs.
Continued
001GBFP5011PC-UC/CED.p65 3/11/05, 4:23 PM63