Filter
Top Products
22 (GB)
Settings for Normal Recording
For normal recording, you may select an appropriate
picture quality, frame or field recording, audio
recording, and a recording cycle. Use NORMAL REC
MODE SET of MAIN MENU 1.
<NORMAL REC MODE SET>
PICTURE QUALITY : HIGH
FRAME/FIELD RECORDING : FIELD
AUDIO RECORDING : ON
REC CYCLE : A 0.10 SEC ( 20H)
PICTURE QUALITY
Select an appropriate picture quality from among 5
levels. The default is HIGH.
HYPER: To record with 58 KB/field (including a
header of 2 KB)
SUPER: To record with 44 KB/field (including a
header of 2 KB)
HIGH: To record with 32 KB/field (including a
header of 2 KB)
MID: To record with 24 KB/field (including a header
of 2 KB)
LOW: To record with 17 KB/field (including a header
of 2 KB)
The lower the mode you select, the longer the possible
recording time becomes.
FRAME/FIELD RECORDING
Select the image capture mode.
FRAME: To record an image in units of frames. This
allows you to select frame display or field display
when playing back the image.
FIELD: To record an image in units of fields.
AUDIO RECORDING
To record an audio channel along with images, set
AUDIO RECORDING to ON.
Note
Audio recording can be activated when you select a
REC CYCLE value less than 0.10 (HSR-X200)/0.12
(HSR-X200P) in FIELD mode or 0.20 (HSR-X200)/
0.24 (HSR-X200P) in FRAME mode.
REC CYCLE
You may select from among 27 steps (displayed by
rounding off to the second decimal place).
The recording cycles in frame mode are doubled
compared with those in field mode.
For the table of recording cycles and recording times, see
page 61(GB).
Setting procedure
1 Press the MENU button to display MAIN MENU 1
on the monitor screen.
2 Turn the Jog dial to highlight 5. NORMAL REC
MODE SET and turn the Shuttle dial clockwise.
The NORMAL REC MODE SET display appears.
3 Turn the Jog dial to highlight the item to be set and
turn the Shuttle dial clockwise to finalize your
selection.
The current setting of the selected line flashes.
4 Turn the Jog dial to change to the desired setting
and turn the Shuttle dial clockwise to register the
new setting.
According to the selected picture quality and
recording cycle, the possible recording time is
automatically calculated and displayed (in units of
hours) in parentheses at the right end of the REC
CYCLE line.
When you set AUDIO RECORDING to ON, “A”
is displayed before the REC CYCLE value if audio
recording is valid with the specified recording
cycle.
5 Press the EXIT/OSD button to exit the menu.
Normal Recording