Filter
Top Products
60 (GB)
General
Recording method Motion JPEG compression
Color system HSR-X200: NTSC color
HSR-X200P: PAL color
Picture resolution
HSR-X200:
720 × 240 pixels (Field mode)
720 × 480 pixels (Frame mode)
HSR-X200P:
720 × 288 pixels (Field mode)
720 × 576 pixels (Frame mode)
Operating temperature range
5°C to 40°C (41°F to 104°F)
Operating humidity range
80% or less
Power supply HSR-X200: 120 V AC, 60 Hz
HSR-X200P: 220 to 240 V AC,
50/60 Hz
Current consumption HSR-X200: 0.4 A
HSR-X200P: 0.24 A
External dimensions 420 × 96 × 376 mm (w/h/d)
(16
5
/
8
× 3
7
/
8
× 14
7
/
8
in.)
Mass 5.5 kg (12 lb 2 oz)
Video input/output
Input VIDEO IN: 1 Vp-p, 75 Ω,
unbalanced (BNC type)
S-VIDEO IN: Separate Y/C
signal (Mini DIN 4-pin)
Output VIDEO OUT: 1 Vp-p, 75 Ω,
unbalanced (BNC type)
S-VIDEO OUT: Separate Y/C
signal (Mini DIN 4-pin)
Loop output VIDEO: 1 Vp-p, 75 Ω,
unbalanced (BNC type)
S-VIDEO: Separate Y/C signal
(Mini DIN 4-pin)
Audio input/output
Input –8 dBs, phono jack
27 kΩ, unbalanced
Output –8 dBs, phono jack
600 Ω, unbalanced
Microphone input –60 dBs, ø3.5-mm minijack,
10 kΩ, unbalanced
Specifications
Alarm and control input/output
Alarm input Normal open (Low active)
Alarm reset input Normal open (Low active)
Alarm output +5 V, 5.7 kΩ (Low active)
Non Rec output +5 V, 5.7 kΩ (Low active)
Clock set output +5 V, 5.7 kΩ (Low active)
Clock set input Normal open (Low active)
Warning output +5 V, 5.7 kΩ (Low active)
Full output +5 V, 5.7 kΩ (Low active)
Alarm full output +5 V, 5.7 kΩ (Low active)
RS-485 (A, B, GND) Push-lock terminals
Remote control input Resister alley switch
Series output +5 V, 5.7 kΩ (Low active)
Series input Low level
Switch output +5 V, 5.7 kΩ (Low active)
Supplied accessories
AC power cord (1)
Power cord tie (1)
Ferrite core (1) (HSR-X200P only)
Rack mount brackets (1 set)
Operating instructions (HSR-X200: 1, HSR-X200P: 2)
Optional accessory
HSBK-X201 hard disk drive
Design and specifications are subject to change
without notice.