Filter
Top Products
57 (GB)
Menu Settings
If you logged on with ID3, menu operations are
allowed.
Click on
(MENU SETTING) to display the Menu
Select display and click on the menu item on the
display to select it.
Menu settings are achieved with selections from
dropdown lists and registration by clicking on SET or
SAVE.
1. CLOCK SET: To set the built-in clock of the HSR-
X200/X200P.
You can set it in the same procedure as with
LANGUAGE/CLOCK SET on the recorder on page
44(GB).
2. SUMMER TIME (DAYLIGHT SAVINGS) SET/
EXT CLOCK SET: To perform the settings
required for the summer (daylight-savings) time and
external clock adjustment.
You can set the same items as with LANGUAGE/CLOCK
SET on the recorder on page 44(GB).
3. VIDEO INPUT/PRE REVERSE: To specify the
type of the multiplexer connected to the recorder
and the pre-reverse time.
You can set the same items as with VIDEO INPUT/PRE
REVERSE on the recorder on page 31(GB) or 39(GB).
4. RECORDING AREA SET: To display the
information regarding the recording areas of the
built-in hard disk of the HSR-X200/X200P. While
you cannot change the area assignment via the
network, the AREA FULL RESET buttons are
valid.
Operate them in the same manner as with RECORDING
AREA SET on the recorder on page 46(GB).
5. RECORDING CONDITIONS SET: To set
OVERWRITE function, etc.
You can set the same items as with RECORDING
CONDITIONS SET on the recorder on page 47(GB).
6. NORMAL REC MODE SET: To set the
conditions for normal recording.
You can set the same items as with NORMAL REC
MODE SET on the recorder on page 22(GB).
7. TIMER SET: To set the conditions for timer
recording.
You can set them with the same procedure as with TIMER
SET on the recorder on page 27(GB).
8. HOLIDAY SET: To specify holidays.
You can specify with the same procedure as with
HOLIDAY SET on the recorder on page 28(GB).
9. ALARM REC MODE SET: To set the conditions
for alarm recording.
You can set the same items as with ALARM REC MODE
SET on the recorder on page 24(GB).
You can also perform the ACTIVITY DETECTION
SENSOR settings on the same display.
10. DISPLAY SET: To turn on/off the on-screen data
items.
You can set the same items as with DISPLAY/VIDEO
LOSS SET on the recorder on page 48(GB).
11. RS-232C/RS-485 SET: To show the information
regarding external control settings on RS-232C/RS-
485 SET on the recorder
(page 43(GB)). The settings
cannot be changed via the network.
12. BUZZER SET: To turn on/off the buzzers.
You can set the same items as with BUZZER SET on the
recorder on page 48(GB).
13. NETWORK SET: To perform the settings
required for operations via the network.
You can perform the same items as with NETWORK SET
on the recorder on page 40(GB) except LAN CARD
selection and NETWORK CONTROL ON/OFF.
You can also select NETWORK SPEED from the
dropdown list.
14. HDD SET: To display the information regarding
the hard disk expansion set on HDD SET on the
recorder
(page 43(GB)). Only selection of drive for
playback is allowed via the network.
15. POWER FAILURE/USED TIME: To display
the information of power failure, usage time, and
firmware version as POWER FAILURE/USED
TIME of the recorder
(page 59(GB)).