Filter
Top Products
23 (GB)
Procedure of Normal Recording
To start recording
Press the z REC button.
The indicator on the z REC button lights, and
recording begins.
Recording is made with the specified picture quality
and at the specified recording cycle in the normal
recording area.
When you set AUDIO RECORDING to ON and audio
recording is valid with the specified recording cycle,
audio is recorded with video.
Note
When timer recording has been set (the indicator on
the TIMER button lit), recording cannot be started
with the z REC button. First press the TIMER button
to cancel timer recording.
When the normal recording area becomes full
If overwriting of the normal recording area has been
set to OFF, a warning message will appear on the
monitor screen when the remaining capacity drops to
the specified value (1% with the default). At the same
time, the FULL indicator flashes and a warning signal
is output from the FULL terminal on the rear panel.
The overwriting ON/OFF setting and the value of the
remaining for warning can be changed with
RECORDING CONDITIONS SET of MAIN
MENU 1.
For details, see page 46(GB).
To stop recording
Press the REC STOP button.
POWER
ALARM
ALARM FULL
S PAUSE s STOP G PLAY
l
ALARM
L
-
LOCK
PRE REVERSE PLAY
a REC
TIMER
REC
STOP
DIGITAL SURVEILLANCE RECORDER HSR-X200
FULL
z REC button
and indicator
REC STOP button
FULL indicator