Filter
Top Products
Choosing Your Application AXIS 2100 User’s Guide
14
Uploading Pre and/or Post Alarm Images to a Remote FTP server
The AXIS 2100 is an ideal solution for light indoor surveillance applications. By connecting your
chosen external alarm devices to the I/O connector, you can quickly configure the product to
upload single images or pre/post alarm image sequences to an FTP server when a time or
alarm/input-based event occurs.
Using the available Wizards, you organize the times and frequency at which images are taken and
uploaded to the target FTP server. You can optionally arrange to send the whole alarm buffer via
e-mail.
Installation and Configuration Overview
You configure the AXIS 2100 to upload Pre and/or Post Alarm images, as follows:
Note: You can refine your application using the Web-based Administration Tools.
1. Connect the AXIS 2100 to your local network. Refer to Installing Your Camera on a Network, on page 20.
2. Open the Home Page in your browser and start the Installation Wizard. Complete the Wizard to establish the
standard Security, Date and Time, Image General Layout and TCP/IP Network settings - selecting network as your chosen
method of connection in the Modem or Network dialog. Refer to Configuring Your Camera, on page 35.
3. Continue the configuration of your product using the Application Wizard to define the target FTP server and define
your preferred mode of operation - choosing Alarm Mode to upload single images, or pre/post alarm image sequences,
when a defined alarm or time-based event occurs.
4. Having completed the Wizard, you should now verify the configuration by triggering the defined alarm event and then
viewing the uploaded images in your browser.