Canon 9339B001 Digital Camera User Manual


  Open as PDF
of 196
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
63
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
UsingtheFaceSelf-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(=
76). This is useful when including yourself in group photos or similar
shots.
1 Choose[ ].
Follow steps 1 – 2 in “Specic Scenes”
(=
55) and choose [ ], and then
press the <l> button.
Press the <q><r> buttons or turn the
<5> dial to choose [
], and then press
the <l> button.
2 Composetheshotandpress
theshutterbuttonhalfway.
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3 Presstheshutterbuttonallthe
waydown.
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
The lamp blinks and the self-timer sound
is played.
4 Jointhesubjectsinthe
shootingareaandlookatthe
camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the ash res, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
] in step 1. [Blink Detection] (=
49) is only available for the nal shot.
• The zoom factor cannot be changed with the <
> button after you press the
shutter button all the way down.
 previous next