Filter
Top Products
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
80
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Flash
Still Images
Changing the Flash Mode
You can change the ash mode to match the shooting scene. For details on
the ash range, see “Flash Range” (=
190).
1 Raisetheash.
Move the <h> switch.
2 Congurethesetting.
Press the <r> button, choose a ash
mode (either press the <q><r> buttons
or turn the <5> dial), and then press the
<m> button.
The option you congured is now
displayed.
•The setting screen cannot be accessed by pressing the <r> button
when the ash is lowered. Move the <h> switch to raise the ash,
then congure the setting.
[ ]Auto
Fires automatically in low-light conditions.
[h]On
Fires for each shot.
[Z]SlowSynchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of ash range.
•In [Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (=
82).
•In [Z] mode, even after the ash res, ensure that the main subject
does not move until the shutter sound is nished playing.
[!]Off
For shooting without the ash.
•If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.