Filter
Top Products
PRINTING IMAGES
193
■ Connecting the Camera to Your Printer
EX-Z60 Owners: Read the information below.
EX-Z60DX Owners: Read the information starting from
page 194.
● EX-Z60
1.
Check the battery level indicator to make sure
that the battery is fully charged, and then
press the power button to turn off the camera.
• If battery power is low, replace the battery.
• The camera does not draw power over the USB
cable.
2.
Use the USB cable that comes with the
camera to connect the camera to a printer.
• Take care when connecting the USB cable to the
camera or your printer. USB ports and cable plugs
are shaped for proper positioning.
C
USB
USB port
USB cable
USB/AV connector
Make sure that the side of the connector that is marked
with an arrow (
̆
) is facing in the same direction as the
front (lens side) of the camera.