Filter
Top Products
OTHER RECORDING FUNCTIONS
95
Using Continuous Shutter
You can configure the camera to record only a single
snapshot each time the shutter button is pressed, or to
keep recording as long as the shutter button remains
depressed. You can select from among the following three
continuous shutter modes.
• Normal-speed continuous shutter
You can continually record images until memory becomes
full.
• High-speed continuous shutter
Record up to three consecutive images at high speed.
• Flash continuous shutter
Use this mode to record up to three consecutive images,
firing the flash for each one.
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “Continuous”,
and then press [̈].
3.
Use [̆] and [̄] to
select “Normal
Speed”, “High
Speed”, or “Flash
Cont. ”, and then
press [SET].
• This causes the
applicable icon to
appear on the monitor
screen.
: Normal-speed continuous shutter
: High-speed continuous shutter
: Flash continuous shutter
• With “Off”, snapshots are recorded one at a time.
IMPORTANT!
• Turning off the camera automatically turns off the
continuous shutter mode.