Filter
Top Products
VIEWING IMAGES ON A COMPUTER
215
IMPORTANT!
• Never use your computer to edit, delete, move, or
rename images stored in the camera’s file memory.
Doing so can cause problems with the image
management data used by the camera, which may
make it impossible to display images on the camera
or it may cause large error in the number of images
value displayed by the camera. Always copy images
to your computer before performing any edit, delete,
move, or rename operation.
4.
Perform either of the following operations to
terminate the USB connection.
• EX-Z60: On your Macintosh screen, drag the camera
drive to the trash can. Next, disconnect the USB
cable from the camera and then turn off the camera.
• EX-Z60DX: On your Macintosh screen, drag the
camera drive to the trash can. Next, press the USB
cradle [USB] button. After making sure that the
cradle’s USB lamp is not lit, remove the camera from
the cradle.
■ USB Connection Precautions
• Do not leave the same image displayed on your computer
screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera
operation or USB cradle operation (EX-Z60DX) while data
communication is in progress. Doing so can cause data to
become corrupted.