Filter
Top Products
BASIC IMAGE RECORDING
63
Using the easy Mode
The easy mode eliminates troublesome setups. This mode
is recommended for those who are new to digital imaging.
1.
In the REC mode, press [MENU] .
2.
Use [̇] and [̈] to select the “REC” tab.
3.
Use [̆] and [̄] to select “easy Mode”, and
then press [̈].
4.
Use [̆] and [̄] to select “On”, and then
press [SET].
• This enters the easy mode and causes “ ” to
appear on the monitor screen.
5.
Compose the image on the monitor screen so
the subject is within the focus frame.
6.
Press the shutter button half way to focus the
image.
• The focus frame will turn green and operation lamp
will light green when focusing is complete.
7.
After making sure that the image is focused
properly, press the shutter button the rest of
the way down to record.