VIEWING IMAGES ON A COMPUTER
200
IMPORTANT!
• EX-Z60: If battery goes low during printing, printing
may stop and the camera may shut down.
• EX-Z60DX: If battery goes low during printing when
you are not using the AC adaptor to power the
camera, printing may stop and the camera may shut
down. Use of the special AC adaptor is
recommended to power the camera during data
communication.
• If you plan to transfer file data from the camera’s
built-in memory to your computer, make sure there is
no memory card loaded in the camera. If there is,
remove the memory card from the camera before
you connect to your computer.
■ Install the USB driver onto your computer
Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer. If you do, the computer will
not be able to recognize the camera.
• USB driver installation is required in the case of
Windows 98SE and 98. Do not connect the camera to
a computer running one of the above operating
systems without installing the USB driver first.
• USB driver installation is not required in the case of
Windows XP, 2000, and Me.