Filter
Top Products
VIEWING IMAGES ON A COMPUTER
199
VIEWING IMAGES ON A COMPUTER
After establishing a USB connection between the camera
and your computer, you can use your computer to view
images in file memory and copy images to your computer’s
hard disk or other storage media. In order to do this, you
first need to install the USB driver located on the CD-ROM
that comes bundled with the camera onto your computer.
Note that the procedure you need to perform depends on
whether you are using computer running under Windows
(see below) or a Macintosh (see page 209).
Using the Camera with a Windows
Computer
The following are the general steps for viewing and copying
files from a computer running under Windows. You can find
details about each operation in the procedures that follow
below. Note that you should also refer to the
documentation that comes with your computer for other
information about USB connections, etc.
1. If you are running Windows 98SE or 98, install the
USB driver onto your computer.
• You need to perform this step only once, the first
time you connect to your computer.
• If you are running Windows XP, 2000, or Me, you do
not need to install the USB driver.
2. Establish a connection between the camera and
computer.
3. View and copy the images you want.