Epson PictureMate Photo Printer User Manual


 
113
Install the photo cartridge immediately after you remove it from its package. If
you leave a cartridge unpacked for a long time before using it, normal printing
may not be possible.
Do not use a photo cartridge beyond the date printed on the cartridge carton;
otherwise, it may result in reduced print quality. For best results, use up the photo
cartridge within six months of installing it.
After bringing a photo cartridge inside from a cold storage site, allow it to warm
up at room temperature for at least three hours before using it.
Store photo cartridges in a cool, dark place.
Do not touch the green IC chip on the bottom of the cartridge. Doing so may
prevent normal operation and printing.
The IC chip on the photo cartridge retains a variety of cartridge-related
information, such as the amount of ink remaining, so that the cartridge may be
removed and reinstalled freely. However, each time the cartridge is inserted, some
ink is consumed because the printer automatically performs a reliability check.
Store each photo cartridge so that the bottom of its packaging faces down.
PictureMate Screen (LCD) Safety Instructions
The LCD screen contains a few small bright or dark spots. These are normal and
do not mean that the screen is damaged in any way.
Only use a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical
cleansers.
If the LCD screen is damaged, contact your dealer. If the liquid crystal solution
gets on your hands, wash them thoroughly with soap and water. If the liquid
crystal solution gets into your eyes, flush them immediately with water. If
discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.