Filter
Top Products
77
5. Disconnect the power cord and any connected USB cable from the back of
PictureMate.
6. Pack both the PictureMate and its power cable in the box that PictureMate came
in, or in the optional Carrying Case.
Caution: Make sure the photo cartridge is installed before transporting. Don’t
place PictureMate on its side or upside down, or ink may leak.
Note: If your prints don’t look as good after PictureMate
has been moved, try
aligning the print head. See Aligning the Print Head Directly From PictureMate
.
Tip: You can order an optional PictureMate Carrying Case (part# ARC1B) from the
Epson Store at (800) 873-7766 or visit www.epsonstore.com (U.S. sales only). In
Canada, please call (800) 463-7766 for dealer referral.
Cleaning PictureMate
To keep PictureMate working at its best, you should clean it several times a year.
Follow these steps:
1. Turn off PictureMate, unplug the power cord, and disconnect any USB cables or
drives.
2. Remove all paper, then use a soft brush to clean any dust or dirt from the paper
feeder.
3. Clean the PictureMate exterior with a soft, damp cloth.
4. Use a soft, dry cloth to clean the PictureMate screen. Do not use liquid or
chemical cleaners on it.