Filter
Top Products
89
Running a Printer Check
You may need to run a printer check to see if a problem comes from PictureMate
itself or some other source.
1. If PictureMate is connected to your computer or other USB device, make sure
they are both turned off. Then disconnect the USB cable from PictureMate.
2. On the Main Menu, press or to highlight More Options, then press OK.
3. Press or to highlight Maintenance, then press OK.
4. Press or to highlight
Nozzle Check, then press OK.
5. When you see this message, press the Print button.
Press the On button to turn PictureMate off. Wait a
few seconds, then turn it on again. If the error does not
clear, see Where To Get Help
.
Message What to Do