Filter
Top Products
28
You can go back and change settings at any time by opening PhotoStarter:
■ In Windows, click Start, point to Programs (or All Programs), Film Factory,
and click
EPSON PhotoStarter3.0. Open the Settings menu and choose
Change Settings.
■ On a Macintosh, open the EPSON PhotoStarter folder, then double-click
EPSON PhotoStarter. Open the Tools menu and choose Change Settings.
Configuring CardMonitor
Follow these steps to configure Epson CardMonitor in the Macintosh OS X Image
Capture utility:
1. Open the Applications folder and double-click Image Capture.
2. Open the Image Capture menu and select Preferences.
3. From the Camera Preferences list, select Other. A new Applications folder opens.
4. Open the Epson CardMonitor folder, select Epson CardMonitor, and click the
Open button.
5. Close the Image Capture utility. CardMonitor will now open automatically when
you insert a memory card. Follow the on-screen instructions.
Preparing to Remove a Memory Card
Once you’re finished copying photos from your memory card, follow the steps below
to remove it. Be sure to remove any cards before unplugging the USB cable from
PictureMate.
Caution: Do not eject a card while the card light is flashing, or without performing
the steps described below, or you may lose data on the card. Be sure your
memory card has been removed before unplugging the USB cable.
1. Depending on your operating system, you may need to do one of the following:
■ If you’re using Windows XP or 2000, click the Unplug or Eject
Hardware
icon on the taskbar.
In Windows XP, click Safely Remove USB Mass Storage Device.
In Windows 2000, click
Stop USB Mass Storage Device.