Filter
Top Products
15
Preferences screen ( Setup | Preferences )
The Preferences screen establishes the systemwide features of language and the display of the camera’s spatial
coordinates.
Display page ( Setup | Preferences | Display )
Figure 20. Display page ( Setup | Preferences | Display )
Net mask Enter the subnet mask address of the network subdivision that the dome is
assigned to.
Server Enter the IP address of the network server. If used, enter the IP address of the
TFTP host. See Firmware Update screen ( System | Firmware Update ) on
page 61.
Gateway Enter the address of the gateway between the dome and the network server.
MAC address Provided as the unique address of the dome, the MAC address allows you to
connect to the dome before you have set up its network addressing. The MAC
address is assigned at the factory. The installer establishes the overriding IP
address during installation. See the above IP address item.
Note: Remember to select OK to save any changes you make on the page.
Language The Language feature sets which language the programming interface uses to
display its content and your entries.
Choice is English.
Branding The Branding feature displays GE branding during product demonstrations.
Choices are Off (default) and On.
Temperature display The Temperature display feature sets which unit is used to display the current
operating temperature for the dome on the monitor screen.
Choices are Off (default), Celsius, and Fahrenheit.