Filter
Top Products
Legend
User Manual
56
Power-on and Resume screen ( Control | Power-on and Resume )
Figure 48. Power-on and Resume screen ( Control | Power-on and Resume )
Note: Remember to select OK to save any changes you make on the page.
Power-on operation Power-on defines the first operation that the dome performs after it is
powered up and initialized.
Choices are Off (default), Preset, Macro, ShadowTour, and Autopan.
Number
(power-on operation)
Enter a number for the operation selected under Power-on operation.
Choices are based on the selection made under operation.
Resume delay Resume delay is a feature that sets how long the keypad is inactive before the
Resume operation is performed.
Choices are Off (default), 15 sec, 30 sec, 1 min, 2 min, 3 min, 4 min, and 5 min.
Resume operation Resume defines the operation for the dome to perform after the keypad has
been inactive for a period of time. This command will not activate if a tour or
autopan is in progress.
Note: If turned on, the Resume feature interrupts tours and autopanning. Resume does
not interrupt alarms.
Choices are available only if a delay time is selected and include Preset
(default), Macro, ShadowTour, and Autopan.
Number
(resume operation)
Enter a number for the operation selected under Resume operation.
Choices are based on the selection made under operation.