Filter
Top Products
Legend
User Manual
16
Coordinates page ( Setup | Preferences | Coordinates )
You can display the dome’s pan, tilt, or zoom coordinates on the monitor screen, if desired. You can display
any or all of the coordinates. You can also choose how to display each one.
Figure 21. Coordinates page ( Setup | Preferences | Coordinates )
High temp warning The High temp warning feature allows you to display a high-temperature
reading on the monitor screen when the temperature in the dome has reached
a set high threshold. Place a check mark in the check box to display this
warning. The threshold and duration features then become available.
Threshold (high-temp) The high-temperature threshold feature allows you to set the high boundary of
the allowable temperature range for the dome.
Choices range from -40 to 200 in 10-degree increments. Default is 0.
Duration (high-temp) The high-temperature duration feature allows you to set how long the warning
appears on the monitor screen.
Choices are During action (default) and Indefinite.
Low temp warning The Low temp warning feature allows you to display a low-temperature
reading on the monitor screen when the temperature in the dome has reached
a set low threshold. Place a check mark in the check box to display this
warning. The threshold and duration features then become available.
Threshold (low-temp) The low-temperature threshold feature allows you to set the low boundary of
the allowable temperature range for the dome.
Choices range from -40 to 200 in 10-degree increments. Default is 0.
Duration (low-temp) The low-temperature duration feature allows you to set how long the warning
appears on the monitor screen.
Choices are During action (default) and Indefinite.
Note: Remember to select OK to save any changes you make on the page.