Filter
Top Products
Page 8
Graphical User Interface
Dual-Tap TM-4200CL AccuPiXEL Series Camera-Control Software
3.2 Using the CamLink Mode
• When CamLink mode is selected, the camera searches for the DLL to the frame grabber. Click the
GO button. Choose the dll for the desired frame grabber.
FIGURE 8. Setting up CamLink
FIGURE 9. Choose the desired frame driver .dll
• If the frame grabber that corresponds to the dll is not present, an error message displays.
FIGURE 10. An error message appears if the .dll application is missing.
• Click Start=>All Programs=>DualTapAccuPiXEL=>DualTapAccuPiXEL to open the Dual Tap
software.
3.2.1 GigE Mode
GigE mode is not supported for the CL camera.