Filter
Top Products
Page 22
Installation
TM/TMC-4200CL Series Progressive Scan Cameras
5 Installation
The following instructions are provided to help you to set up your camera quickly and easily. We
suggest that you read through these instructions before you unpack and set up your camera system.
5.1 Getting Started
5.1.1 Unpacking Instructions
We recommend that you save the original packing cartons for the cameras and accessories in case you
need to return or exchange an item.
We also recommend that you bench-test any equipment being sent to another location for field
installation to assure that everything is fully operational as a system.
5.1.2 Components List
Check your order against the Components List shown below to assure that you have received everything
as ordered, and that nothing has been overlooked in the packing materials. If any item is missing contact
your JAI representative immediately.
• TM-4200CL camera
• Camera-specific data sheet
• Camera-appropriate operation manual (if ordered)
• Dual-tap AccuPiXEL camera-control software
5.1.3 Accessories and Options
Following is a list of additional accessories and options that may be required for your application.
Please check with your JAI representative before you install your camera to determine what you might
need.
• PD-12U series power supply
• 12P-02S power cable
• 26CL-02-26 Camera Link cable
5.2 Camera Setup
5.2.1 Heat Dissipation
The TM-4200CL is a compact 2K by 2K camera. Since all the electronics have been packed in a
compact package, the outer case of the camera can become hot due to heat dissipation. For optimal
performance, JAI recommends using a cooling fan to set up a positive air flow around the camera and
following the precautions below.