Filter
Top Products
Page 17
Graphical User Interface
Dual-Tap TM-4200CL AccuPiXEL Series Camera-Control Software
3.3.11 (b) Test Pattern
From the main menu, select “Option” and click ‘Test pattern” to enable or disable the test pattern
FIGURE 31. Use the “Option” menu to access the test pattern.
3.3.11 (c) Pixel Output Order
FIGURE 32. Use the “Option” menu to access the test pattern.
From the main menu, select “option” and “Video data output order” and click “<--- <---” or “<--- --->”
or “<<------”
“<--- <---” = First video data are pixel no. 1 and no. 1025.
“<--- --->” = First video data are pixel no. 1 and no. 2848.
“<<------” = First video data are pixel no. 1 and no. 2.
3.3.12 EEPROM
Dual-tap AccuPiXEL cameras have seven pages available to restore the cameras’ settings. Page 0 is the
factory default page and cannot be edited without a password. Page 1 is power up default. This page
will allow you to save default setting to load at power up.
3.3.12 (a) Load Page
From the main menu, select “file” and “load page” and click the page number and load camera setting
from EEPROM.
3.3.12 (b) Save Page
From the main menu, select “File,” “Save Page,” and click the page number to save the current camera
setting to EEPROM.
Note: Page 0 is the factory default page and is protected by password.