Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-42 Preparing the Camera and the Computer
Quitting — Disconnecting the Camera
from the Computer
Complete these steps when you have completed your work with the
camera and the computer.
1. If Photoshop or other supported application is running, quit that
application now.
2. If the power switch on the camera is set to on (I), turn off the camera
by sliding the power switch to off (O).
3. Turn off your computer.
4. Turn off other SCSI devices if present.
5. (Optional) Disconnect the camera from the computer.
CAUTION: Do not disconnect the camera from the computer while the
driver image window is open, or even while the computer is on. Doing
so may result in the loss of data from the PCMCIA card in the camera or
from the hard disk in your computer. Instead, turn off all equipment in
the order described above before disconnecting the camera.
Your camera is now ready to take pictures as described in Chapter 5.