Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Camera 5-7
4. Select a film winding mode (Single or Continuous) or a Self-timer
mode (2-second delay or 10-second delay) by turning the main dial
after pressing the DRIVE button located inside the hinged door on the
right side of the camera.
DRIVE button
5. Set the ISO value by turning the main dial while simultaneously
pressing the AF and metering mode selector buttons; the specifications
appendix lists supported ISO values.
NOTES: ISO values outside these values cannot be set. Exposure compensa-
tion values up to +/- 3 steps in 1/3- or 1/2-step increments may be selected at
the supported ISO value.
As with film, you may want to use flash to achieve maximum image quality
in low light situations.