Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera 7-9
Disk Indicator
The disk indicator, shown in each of its stages below, appears when you
wake the camera. It indicates the amount of the available PCMCIA card
filled with images. When the entire disk indicator flashes, the PCMCIA
card is full.
Card up to
1/6 filled
Card filled
(indicator flashes)
Card
empty
Disk Error Indicator
Two characters, an “E” followed by a single digit (for example “E2”) — if
they appear on the LCD — indicate that an error has occurred on the
PCMCIA card. If this occurs, remove and reinsert the PCMCIA card (or try
another card if available), and retry the operation. If you continue to have
problems, refer to the troubleshooting section of this chapter and to the
discussion of F
ORMAT in Chapter 8.