Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera 7-43
3. Attach the strap to your hand.
4. Turn off the camera.
5. If the AC battery charger/adapter is connected, disconnect it from the
camera.
6. Lay the camera on its back on a flat, steady surface.
7. Loosen the handstrap (do not remove it) by separating the Velcro
parts; you may need to slide the buckle down on the lower end of the
strap to loosen it.
8. Loosen the large mounting screw in the center of the base of the
camera back until it turns freely.
Mounting screw
.