Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera 7-37
The camera acts
erratically, unusual or
unexpected characters
appear on the camera
back LCD, or the LCD
flickers unexpectedly.
The battery is low or
dead.
Recharge the battery in the camera
back.
The firmware in the
camera has become
corrupted.
Update camera firmware, as
described in Chapter 8.
You are experiencing
erratic camera behavior or
unusual characters appear
on the camera back LCD.
You know the battery is
charged.
The firmware in the
camera has become
corrupted.
Update camera firmware as
described in Chapter 8.
The camera is stuck in
one mode for unknown
reasons.
An unexplained event
may have occurred.
Update camera firmware as
described in Chapter 8.
The camera is warm when
the camera is connected to
the AC battery
charger/adapter.
A warm temperature is
normal.
Continue to operate the camera
normally.
Trouble Possible Cause Suggested Solution
Blinks when
battery is
exhausted