Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-40 Reference — Camera
2. Turn off the camera.
3. Remove the lens from the camera.
4. Turn on the camera.
5. Select the bulb mode. (Press and hold down the shooting mode
selector — Mode — and rotate the main dial until “bulb” is dis-
played.)
6. Press and hold the shutter release button; the shutter stays open, and
the imager is visible through the lens mounting flange.
CAUTION: Do not attempt to clean the imager while the camera is in
this state; the shutter can be damaged if you release the shutter button
while any object is in the opening.
Lens mounting flange
Imager
(visible through
lens mounting flange)