Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-44 Reference — Camera
9. CAUTION: Use extreme caution as you complete this step because
the Canon EOS-1 N and the KODAK camera back are connected by
thin wires.
Hold down the camera back with one hand while you use the other
hand to lift the camera body up and place it as shown below.
ESD wrist strap cable
10. Attach the clip on the end of the ESD wrist strap cable to the edge of
the plate surrounding the imager as shown above; you and the camera
will now be at the same electrical potential.