Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-34 Reference — Camera
The PCMCIA card is
not formatted; “E6”
appears on the camera
back LCD.
Format the PCMCIA card as
described in Chapter 4, and try
again.
The battery is low. Recharge the battery, or operate
from the AC battery charger/
adapter.
Pressing the camera
shutter release button
does not release the
shutter.
The Canon EOS-1 N
is in ONE SHOT
focus mode and can
not focus.
Choose another focus mode or try
to focus on another part of the
subject that allows the camera to
focus.
Refer to the supplied EOS-1 N
Instructions.
No PCMCIA card is in
place in the camera.
Insert a PCMCIA card or operate the
camera while connected to a
computer as described earlier in
this chapter.
The camera is off. Turn on the camera.
The PCMCIA card in
the camera is full.
Delete images from the PCMCIA
card in the camera
If connected to a computer, delete
images or erase the PCMCIA card
with the software driver.
Use another PCMCIA card, if
available.
Trouble Possible Cause Suggested Solution
Blinking
Blinks when
battery is
exhausted
Full battery