Filter
Top Products
Setting Menu Screens
FUNCTION 1/5 Screen
This page performs the adjustment function 1 settings. The ON/OFF status for each item is indicated by displaying an asterix (*)
or period (.) in front of the item on the screen.
– FUNCTION 1/5 –
Item
*DETAIL
*2D LPF
SKIN TONE DTL
*MATRIX
*GAMMA
TEST SAW
*FLARE
DETAIL
2D LPF
SKIN TONE DTL
*: ON
·:OFF
MATRIX
GAMMA
TEST SAW
FLARE
FUNCTION 2/5 Screen
This page performs the adjustment function 2 settings.
– FUNCTION 2/5 –
SUPER V
: FRM1
FILTER INH
:OFF
SHOCKLESS AWB
:NORMAL
S. IRIS SW
:S. IRIS
S. SCAN SEL
:ON
Item
SUPER V
FILTER INH
SHOCKLESS
AWB
S.IRIS SW
S.SCAN SEL
Variable
range
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Variable
range
OFF
FRM1
FRM2
ON
OFF
OFF
NORMAL
SLOW
FAST
S.IRIS
30 dB
OFF
ON
OFF
VF
display
ENG
Remarks
Detail (H, V) ON/OFF switching
ENG
ON/OFF switching for 2-dimensional
LPF (Low Pass Filter) which reduces
color smear
ENG
Skin tone detail ON/OFF switching
ENG
ENG
Color adjustment ON/OFF switching
Gamma circuit ON/OFF switching
ENG
Test signal ON/OFF switching
ENG
Flare compensation ON/OFF switching
VF
display
ENG
Remarks
Super V ON/OFF switching
FRM1: Normal mode
FRM2: Lag reduction mode
ENG
Switch that determines whether AWB
memory (Ach, Bch) data is stored for
each filter.
ON:
Ach and Bch memory only
(2 memory units), regardless of
the filter.
OFF: Data is stored for each filter.
(4x2=8 memory units)
ENG
Shockless AWB ON (NORMAL/SLOW/
FAST)/OFF switching
ENG
Super iris (SIRIS)/30dB/OFF
switching
ENG
Synchro scan ON/OFF switching
ON: S.SCAN speed can be varied
by the SUPER IRIS/MODE
CHECK switch.
OFF: Normal mode
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu:
Setting the MENU switch to SET displays the USER menu.
ENG menu:
Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the
ENG menu.
-108
-