Filter
Top Products
Setup Card Operations
Setting menu contents can be stored using setup cards (option). This data can then be used to
quickly recreate the appropriate setup conditions. Subject data, etc. can also be stored on setup
cards. See the Setup Card Application Instructions for a detailed description.
Setup cards are optional, and general purpose memory cards (S RAM 64 Kbyte or more) can be
used.
Setup Card Handling
Setup cards can be inserted and ejected regardless of whether the power is on or off.
However, setup cards should not be inserted or ejected during recording as this may result in
misoperation.
Ejecting setup cards
Lift up on the lower edge of the cover to open the cover and remove the setup card.
<Note>
Take care not to touch the connectors at the front of the setup card.
Inserting setup cards
Position the unit so that the panel with the logo faces you, insert the setup card into the setup card
insertion slot and then close the cover.
<Note>
Check that the unit is positioned with the logo facing you and that the characters are facing the
correct direction, and then insert the card. Be sure to insert the card in the correct direction. If the
card is difficult to insert, the card may be backwards or upside-down. In these cases, do not at-
tempt to force in the card, but check whether the card is backwards or upside-down and then
reinsert the card.
Usage and storage precautions
The following points should be observed when using and storing setup cards.
Avoid high temperatures and humidity.
Do not expose setup cards to water.
Avoid electrostatic charges.
Store setup cards inserted in the unit with the cover closed.
-
81
-