Filter
Top Products
LEVEL 6/6 Screen
This page performs the camera setup level 6 settings.
– LEVEL 6/6 –
Item
H PHASE COARSE
:07
H PHASE FINE
:128
H PHASE
SC PHASE COARSE :0
SC PHASE FINE
:128
COARSE
A. lRlS LEVEL
:078
A. lRlS PEAK/AVE :059
A. IRIS MODE
:NORM1
S. lRlS LEVEL
:073
H PHASE FINE
SC PHASE
COARSE
SC PHASE FINE
A.IRIS LEVEL
A.IRIS
PEAK/AVE.
A.IRIS MODE
S.IRIS LEVEL
Variable
range
0
7
15
0
128
255
0
3
0
128
255
0
78
100
0
59
100
NORM1
NORM2
CENTR
0
73
100
VF
display
ENG
Remarks
H phase rough adjustment during
GENLOCK mode.
ENG
H phase fine adjustment during
GENLOCK mode.
ENG
SC phase rough adjustment during
GENLOCK mode.
ENG
SC phase fine adjustment during
GENLOCK mode.
ENG
Auto iris target value setting
ENG
Auto iris peak: average value ratio
setting
ENG
Auto iris mode selection
NORM1: Light metering over entire
screen (except for edges).
NORM2: Light metering over entire
screen (except for top).
CENTR: Light metering which is
focused solely on the screen
center. The iris value which
matches the subject is set
for this mode even when the
brightness of the subject at
the center differs from that at
the screen edges.
ENG Super iris target value setting
(Backlight compensation mode)
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu:
Setting the MENU switch to SET displays the USER menu.
ENG menu:
Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the
ENG menu.
-119-