Filter
Top Products
Setup Card Operations
Setup Card Data Operations
Operations to store setting data on setup cards and read out stored data are performed at the SET
UP CARD page of the setting menu.
<Note>
When operating the unit with a remote controller, the SET UP CARD page cannot be operated
from the unit.
Formatting setup cards
1
Set the MENU SET/OFF switch to SET. The page on which the previous setting menu opera-
tions were completed appears on the viewfinder screen. (When the menu is used for the first
time, the first page appears.)
2
Press the MENU switch repeatedly until the SET UP CARD page shown below appears.
(This operation can also be performed using the PAGE+ UP/DOWN function.)
– SET UP CARD –
READ ( CAM)
WRITE ( CARD)
CARD CONFIG.
ID READ/WRITE :ON
FUNCTION1~2R/W:ON
L/M/H SET R/W :ON
LEVEL 1~6 R/W :ON
3
Press the SHIFT/ITEM button repeatedly to move the cursor to the CARD CONFIG. position.
4
Press the UP (or DOWN) button. When the setup card has been formatted, the message
shown below appears.
<Note>
When setup cards are formatted, the setting conditions at that time are also input simulta-
neously.
– SET UP CARD –
READ ( CAM)
WRITE ( CARD)
CARD CONFIG.
ID READ/WRITE :ON
FUNCTION1~2R/W:ON
L/M/H SET R/W :ON
LEVEL 1~6 R/W :ON
FORMAT OK
5
When menu operations have been completed, return the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
-
82
-