Filter
Top Products
Successive Shooting in Other Cases
If successive shooting is to be performed after the tape has been run, the cassette has been
ejected, or when using a tape which has only been recorded part-way, follow the procedures out-
lined below.
1,2
3
4
Performing successive shooting after the tape has been run, the cassette has been ejected, or
when using a tape which has only been recorded part-way
1
Press the PLAY button while watching the viewfinder screen and play back the tape.
2
At the place where continuity between frames is to be provided, press the PLAY (or STOP)
button again to stop the tape.
3
Press the RET button on the lens. Preparations for frame-to-frame continuity are made about
two seconds later.
4
Press the VTR START button of the unit or the VTR button of the lens to start recording.
-93-