Filter
Top Products
Power Supply
Power can be supplied to the unit using a battery pack or AC power supply.
Using a battery pack
Panasonic,
Anton Bauer or Sony batteries can be used for the battery pack.
Before using a battery pack, be sure to charge it completely using a battery charger.
See the Handling Instructions for the battery pack and battery charger for a detailed explanation
of charging methods.
Using an Anton Bauer Battery Pack
1
Mount the battery pack.
Insert the battery pack in the direction of the arrow and then slide it into place.
Power Supply Output Connector
Control Switch
2
When detaching the battery hold down the detachment lever of the battery holder and slide
the battery pack in the direction of the arrow.
Lever
Pack
<Note>
The AJ-D700 supports the intelligent battery system and the ultra-light system.
Automatic detection can be performed for intelligent batteries with a remaining battery level of
10% or more. At this time, the remaining battery level is displayed numerically (percentage
display) inside the viewfinder. If the power is turned on with a remaining battery level of 10%
or less, the voltage is displayed. Also, after intelligent battery detection, the remaining battery
level display indicates the level for the intelligent battery even if power is supplied from an
external source.
-23-