Filter
Top Products
Detaching the Eyecup
Detaching the eyecup allows the entire screen to be seen clearly even when shooting with your
eye removed from the viewfinder. This also facilitates the removal of dust which has adhered to
the CRT screen and mirror.
<Note>
Absolutely do not wipe the mirror surface as it has been specially treated. Dust which has adhered
to the mirror should be blown away with a blower, etc.
1
Press the lock button.
2
Turn the lock ring as far as possible in the counter-clockwise direction and line up the align-
ment marks on the lock ring and viewfinder barrel.
Lock Ring
Eyepiece
Alignment Marks
Lock Button
3
Detach the eyecup.
Remounting the eyecup
1.
Line up the alignment marks on the lock ring and the viewfinder barrel.
2.
Line up the alignment mark at the tip of the eyepiece (see the illustration for step 2 above) with
the alignment marks on the lock ring and the eyecup and insert the eyecup into the barrel.
3. Turn the lock ring as far as possible in the clockwise direction and line up the lock ring’s
“LOCK” indication arrow with the alignment mark on the barrel of the viewfinder.
4. The lock button latches with a clicking sound.
“LOCK” Indication Arrow
Viewfinder Barrel
Alignment Mark
Lock Button
-35-