Filter
Top Products
Cassettes
See “Cassettes” (page 135) for a description of cassettes which can be used with the unit.
Inserting and Ejecting Cassettes
Inserting cassettes
1
Check that there are no cables, etc. around the cassette holder and the top panel and then
set the POWER switch to ON.
Power: ON
If condensation has occurred inside the unit, the HUMID display lights. In these cases, wait
until the display goes off before proceeding to step 2.
2
Press the EJECT button. The cassette holder opens.
EJECT Button
Cassette Holder
3
Check that there is no slack in the tape, insert the cassette, and then firmly close the cassette
holder.
Checking that there is no slack in the tape
Press the reel in with your finger and turn it lightly in the direction of the arrow. If the reel does not
turn, there is no slack in the tape.
-87-