Filter
Top Products
Playback—Checking Recorded Contents
Pressing the PLAY button allows black-and-white playback images to be viewed on the view-
finder. Playback images can also be viewed in two other ways.
Rec review:
If the RET VIDEO switch is set to the INT side, black-and-white images of the last
2 seconds of the recorded contents can be seen on the viewfinder.
Color playback:
Connecting a color monitor to the unit’s MONITOR OUT connector allows color
playback images to be viewed on the monitor.
The playback signal is output to the viewfinder even during rewind (REW) and fast forward (FF).
Audio output selection and volume adjustment for the playback signal are performed by the
MONITOR switches and knobs on page 13.
Rec Review
If recording is paused and the RET button on the lens is pressed, the tape is automatically re-
wound and the playback images for the last two seconds appear on the viewfinder. This allows the
recording status to be checked.
After playback, the unit returns to the recording start standby status. Holding down the RET button
rewinds and plays back up to 10 seconds of the tape.
See “Selecting Functions” (page 65) for a description of CAM RET. function settings.
<Note>
The rec review function cannot be used unless recording has been performed for more than
1 second.
Color Playback
Connecting a color monitor to the VIDEO OUT connector of the unit allows color playback images
to be viewed on the monitor.
- 94 -