Filter
Top Products
Setting the Synchro Scan Mode
1
Set the MENU SET/OFF switch to SET.
The page on which the previous setting menu operations were completed appears on the
viewfinder screen. (When the menu is used for the first time, the first page appears.)
2
Press the PAGE button repeatedly until the SYNCHRO SCAN page shown below appears.
(This operation can also be performed using the PAGE+UP/DOWN function.)
– SYNCHRO SCAN –
1/61.7
3
Press the UP (the value increases) or DOWN (the value decreases) button repeatedly to dis-
play the desired frequency. The frequency can be switched continuously within the range of
30.4 Hz to 250.0 Hz.
4
When menu operations have been completed, set the MENU SET/OFF switch to OFF. The
setting menu disappears from the viewfinder screen and the displays indicating the unit’s cur-
rent status appear at the top and bottom of the viewfinder screen.
(If S. SCAN MODE SEL on the FUNCTION 2/5 page of the setting menu is set to ON, the
shutter speed can be varied by the SUPER IRIS and MODE CHECK switches. However,
care should be taken at this time as the SUPER IRIS and MODE CHECK functions cannot be
operated only during SYNCHRO SCAN mode.)
-
73
-