Panasonic AJ-D700P Digital Camera User Manual


 
FUNCTION 3/5 Screen
This page performs the adjustment function 3 settings.
Variable
– FUNCTION 3/5 –
Item
HUMID OPE :OFF
26P CONTROL :OFF
REC START
:NORMAL
HUMID OPE
TC MODE
:DF
UB MODE
:USER
PAUSE TIMER :30
BATTERY SEL :NiCd-12
TCG VF DISP :OFF
26P CONTROL
REC START
TC MODE
UB MODE
PAUSE TIMER
BATTERY SEL
TCG VF DISP
range
ON
OFF
OFF
BOTH
ON
ALL
NORMAL
DF
NDF
USER
REAL
EXT
10
20
30
NiCd-12
NiCd-13
NiCd-14
DIGITAL
ON
OFF
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
Remarks
VTR operation selection when
condensation occurs.
ON:
Operation continues normally.
OFF: All operations prohibited except
for POWER switch and EJECT
button.
26P remote control selection
OFF:
Unit only (26P control does
not function.)
BOTH: Unit and 26P remote control
(TALLY LED indicates unit
REC status.)
ON: 26P remote control only
(TALLY LED indicates 26P
VTR REC status.)
REC acceptance selection for VTR
START/STOP
ALL: REC accepted regardless
of VTR mode.
NORMAL: REC accepted only during
STOP (POWER SAVE)
mode and REC PAUSE
mode.
Time code DF/NDF switching
DF:
Drop frame mode
NDF: Non-drop frame mode
LTC UB usage method selection
USER: User setting (fixed value)
REAL: Real-time operation according
to the TIME DATE time
EXT:
When there is external TC
input, the UBG value is slave
locked. (When there is no
external input, the user setting
Selection for the recording/pause hold
time.
10: 10 minutes
20: 20 minutes
30: 30 minutes
Battery type selection*
NiCd-12: 12 V Nicad battery
NiCd-13: 13 V Nicad battery
NiCd-14: 14 V Nicad battery
DIGITAL: Digital battery
Viewfinder time code display ON/OFF
ON: Time code is displayed.
OFF: Time code is not displayed.
*Even if the BATTERY SEL is selected to NiCd-12, 13 or 14, the camera automatically senses whether or not an Anton Bauer's Intelligent Battery
is used .)
is fitted. In the case of an intelligent battery, a numerical indication (percentage) of power available is displayed in the viewfinder. If the camera is
usually used with an intelligent battery, BATTERY SEL should be set to DIGITAL.
-109
-