Filter
Top Products
Selecting the settings for a selected remote camera
w Setting the shutter speed
The shutter mode and shutter speed of the remote camera
can be selected.
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set the PRESET MEMORY/MENU 5 button
(SHUTTER) to ON.
When the button is pressed and its indicator lights, the
[SHUTTER] menu is displayed on the LCD panel.
SHUTTER : Step
SPEED : 1/100
3 Turn the F1 dial to select the shutter mode.
When “Step” has been selected as the shutter mode,
the shutter speed can be selected by turning the F2 dial.
p The setting will differ depending on the remote
camera connected.
For further details, check the operating instructions of
the model concerned.
p When the shutter speed of a remote camera
connected serially is set and a remote camera in
another group is assigned to the CAMERA STATUS/
SELECTION button, the shutter speed will be set to
“1/100” when a menu operation is next performed.
Notes
w Setting the detail
The image detail (image sharpness) can be adjusted.
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set the PRESET MEMORY/MENU 6 button
(DETAIL) to ON.
When the button is pressed and its indicator lights, the
[DETAIL] menu is displayed on the LCD panel.
DETAIL : On
LEVEL : LOW
3 Turn the F1 dial to select On or Off.
4 Turn the F2 dial to select the detail level.
The detail setting will differ depending on the remote
camera connected.
For further details, check the operating instructions of the
model concerned.
Note